2.4G/5G WIFI Signal Scanner with 2.4-inch TFT Color Display – Router Management Assistant and Usage Analyzer

Description

Product Description:

In a setting laden with countless wifi signals eating up the same frequency point, this can cause signal interference leading to poor quality of your wifi. The solution is here: our highly efficient assistant that enables you to swiftly analyze which frequency point is saturated with signals. You can then adjust your wifi’s frequency towards a less crowded point, hence enhancing the effectiveness of your own wifi.

Functionality:

1. Displays battery level at the top-right corner of the screen.
2. Equipped with an inbuilt 600mAh lithium battery offering approximately 4 hours standby time due to its optimal working current of around 160mA.
3. Comes with an internal lithium battery charging management circuit, taking roughly 2 hours for a complete charge.
4. Utilizes convenient TYPE-C interface for charging.
5. Charging voltage stands at 5V. During charging, red light denotes charging status and green signifies being fully charged.
6. Featuring a bright and clear 2.4-inch TFT color display.

Operating Instructions:

1.To power on or off, press and hold down the button until it responds accordingly
2.Initiate scanning by pressing the button once and suspend this action by pressing it again
3.It maps out all WiFi signals within the 2;4G Frequency band through top waveform display while noting any overlapping points where multiple signals cohabit on a single frequency instance

Package Contents:
1 x Device Main Unit
1 x TYPEC Charging Cable